Lenticular effects.
Adhesive Film.
» Products » Adhesive Film Adhesive Film.
Crystal Clear Mount Double Side Adhesive Film.
Product Description :.

Premium Mounting Tape with excellent clarity and transparency

For the permanent, self-adhesive lamination of even surfaces.
Very easy to process, provides excellent adhesion to almost all materials like lenticular and other plastics.
Suitable for indoor and outdoor application .
Especially suitable for mounting of photographic papers application which is needed to finalize laminated lenticular images.
Our Crystal Clear Mount Double Side Adhesive Film is used by photographers to laminate their print to our lenses and by offset printers to laminate their proofs.

DP Lenticular sells adhesive films to customers buying lenticular sheets

Available Sizes:.
per 50 m roll or per meter  width     122 cm    112 cm   77.5 cm   72 cm   43 cm   33 cm   26 cm   11 cm Product structure:.
Support PET film, 12 µm, transparent Liner on both sides PET-film, 30µm.

Transparent Adhesive pure polyacrylic

permanent, transparent, pH neutral, Solvent free Total Thickness 0,07 mm = 70µm Adhesive weight 60 g/m².
Characteristics :.
Average Value Test Method Adhesion on steel: (after 20 min.) 8 N / 25mm AFERA 5001 Adhesion on steel: (after 24 h) 11 N / 25mm AFERA 5001 Application temperature: min.
10°C   End-Use Temperature range: from -40°C to +150°C   Shelf life: 2 years   Durability: 1 year   The estimated durability is based on accelerated ageing tests and refers to a vertical exposure under middle European climates.
The durability of the product depends on the substrate’s preparation, the atmospheric conditions and the environment al influence.
Exposure to extreme conditions (tropical climate, high humidity, high UV-light exposure or polluted areas) can decrease the durability in a dramatically way.
These products are delivered as roll goods and should be stored vertically on the roll block-support (included) or suspended with roll-core end blocks.  Never store the rolls lying-down.  The products in the original packaging must be stored in dry conditions with a relative humidity between 50 – 60 % and temperature between +18°C – +22°C.  Do not expose the products to direct sunlight or store next to a heating radiator.  Opened rolls should be stored in their original packaging and covered with a protective cover.
These products are subjected to a strict quality control by our supplier QM-System, which is in accordance with ISO/TS 16949, .

DIN EN ISO 9001 and DIN EN ISO 14001

The information is based on our present knowledge and our experience.
Because of the large number of possible influences during the processing and application of this product, this information does not release the user from the obligation to conduct his own tests and trials.
Users of our products are responsible for observing any patent rights that may exist and for following existing regulations.
Our applications technology section is always pleased to give advice about suitability tests on original materials.

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *